Pipes,tubes
Fitting
Round,Square bars
Plates,Sheets,Strips
Flanges & Other kinds of forgings products
Nickel-Copper-Chromium-Silicon: UNS N12160,2.4880 alloy
Chemical Composition:
| Material | Ni | Cr | Iron | Mn | C | Si max | S max | Ti | Mo | P max | W 钨 | Cb+Ta | Co |
| N12160 | remainder | 26.0-30.0 | 3.5max | 1.50 | 0.150 | 2.4-3.0 | 0.015 | 0.20-0.80 | 1.0 | 0.03 | 1.0 | Cb 1.0 | 27.0-33.0 |
Mechanical Properties:
| Tensile Strength,Min PSI (MPa) | Yield Strength (0.2% offset) Min(Mpa) | Elongation in 2 in. or 50mm or 4D,Min.,% |
| 90000(620) | 35000(240) | 40 |
Standards:
| Material | Seamless Tubing &/or Pipe | Welded Tubing | Welded Pipe | Buttweld fitting | Plate/Sheet/Strip | Bar Forging and Forging stock |
| N12160 | SB-622 | SB-626 | SB-619 | SB-366 | SB-435 | SB-564, SB-572 |
Applications:
N12160 nickel alloy is an alloy of nickel, further classified as a wrought nickel. It is typically furnished in the annealed condition. 2.4880 is the EN numeric designation for this material. N12160 is the UNS number.