Stainless steel processing technology

Stainless steel processing technology refers to the performance of stainless steel with stainless steel shear, folding, bending, welding and other mechanical processing of the final production of stainless steel products needed for the process, in the process of stainless steel processing with a large number of machine tools, instruments, stainless steel Processing Equipment. Stainless steel processing equipment classified into shear equipment and surface treatment equipment, cutting equipment is divided into flatting equipment and slitting equipment. In addition, from the thickness of stainless steel, there are cold
Hot rolling processing equipment points. Thermal cutting equipment mainly plasma cutting, laser cutting, water cutting and so on.

The original surface:

NO.1 after hot rolled heat treatment and pickling surface. Generally used for cold rolled materials, industrial tanks, chemical industrial installations, thicker by 2.0MM-8.0MM.

Blunt: NO.2D after cold-rolled by heat treatment, pickling, the soft material, the surface was silver-white gloss, for deep drawing processing, such as automotive components, pipes and so on.

Matte: NO.2B after cold-rolled by heat treatment, pickling, and then finishing the surface so that the moderate light of those who. As the surface is smooth, easy to reground, so that the surface more bright, versatile, such as cutlery, building materials. With surface treatment to improve mechanical properties, almost all uses are met.

Grit NO.3 with 100-120 grinding with abrasive belt products. Has a better gloss, with discontinuous coarse lines. For building interior and exterior decoration materials, electrical products and kitchen equipment.

Fine sand: NO.4 with 150-180 size grinding belt grinding out of the product. Has better gloss, with non-continuous coarse lines, stripes thinner than NO.3. For the bath, building interior and exterior decoration materials, electrical products, kitchen equipment and food equipment.

# 320 with 320 grinding tape products. Has a better gloss, with non-continuous coarse lines, stripes thinner than NO.4. For the bath, building interior and exterior decoration materials, electrical products, kitchen equipment and food equipment.
Hairline HAIRLINE: HLNO.4 A product of ground pattern (Subdivision 150-320) is produced by continuous grinding of a suitably sized polishing belt. Mainly used for building decoration, elevators, building doors, panels and so on.